Scope of application
Suitable for all types, sizes, hardnesses and angles of squeegee grinding.
Main parameters
| Model | TX-MD90A | 研磨电机
Printing Thickness |
台湾0.33KW | |
| 传动电机
|
120W | Grinding Motor
|
90° | |
| Size of printing table | 900mm | Rated voltage/Power | 220V/50HZ/1.32KW | |
| Rotating speed | 2850r/min | front and rear fine-tuning | 0-8cm | |
| fine-tuning up and down | 0-10cm | Dimensions | 1550*620*1000mm |
Main performance
① Automatic scraper grinder is specialized equipment for screen printing grinding.
②This machine adopts imported gold steel grinding wheel and linear guide rail.
③Special grinding design, high grinding precision, no extrusion between the grinding wheel and the scraper, no deformation of the scraper, and easy installation and disassembly of the grinding wheel.
④The scraper after grinding is as smooth as new without waves.
⑤It can grind water and oil amphoteric scraper tip scraping and flat scraping; grinding angle is 90° to match the performance of various special prints.
⑥Easy to use/stable performance, stable grinding wheel speed and good grinding effect.
⑦The machine is easy to operate and can be operated without professional skills.
★Configuration Instructions
① Body structure: The body is solid, the structure is reasonable, the surface is painted, beautiful and corrosion-resistant.
② Power supply: The machine uses two-phase electricity as the main power, which is convenient to place, and the main control electrical components are imported and domestic well-known brands.
③Stroke: This machine adopts imported linear guide rail and round shaft slide rail, and the surface of the slide rail has the characteristics of high precision and wear resistance.
④ Grinding: This machine adopts imported gold steel grinding wheel, which can grind forward and reverse to ensure high quality of grinding;
Machine maintenance
① Before going to work, clean up the sundries on the machine and wipe the machine clean. Lubricating grease should be added regularly to moving parts such as guide rails, guide posts, and bearings.
② The workpiece table is a key component that affects the printing quality. It prevents the impact of hard objects. During printing, the ink cannot be removed. Organic solvents such as Tianna water drip onto the work surface.
③ The electric control panel and buttons should be prevented from being damaged by direct or indirect contact with solvents such as Tianna water, boiled oil and water.
④ The frame paint is to keep the machine from rusting, to prevent damage caused by direct or indirect contact with solvents such as Tianna water, boiled oil and water.
⑤ Drain the sewage and dirt in the oil mist combiner in time. To prevent the pneumatic components from being fed into the normal operation, clean the cup body regularly, and add Peng 2 lubricating oil to the oil cup of the oil mist combiner.
⑥ When adjusting the restrictor valve, the tightening nut must be loosened before adjusting by hand. The handle screw on the machine is used for positioning. After firmly positioning, there is no need to tighten it with excessive force.
⑦ After get off work, turn off the power/air source, clean the wire mesh, and keep it properly. Dust/pressure/hard object piercing.
